At Aceget, we are committed to renewable energy, with no exceptions. Our cutting edge filter technology is designed to Retrofit Emission Control Device (RECD) for DG sets successfully converting them into environmentally friendly power sources. By capturing harmful emissions right at the source we greatly diminish air pollution and enhance your dedication to a cleaner healthier future.

Relied upon by sectors, businesses and organizations nationwide, we offer robust, effective and government-approved solutions that comply with current environmental standards positioning us as one of the most reputable Retrofit Emission Control Device Manufacturers in India.

Types of Retrofit Emission Control Device Technologics 

Retrofit Emission Control Device use technologies like Diesel Oxidation Catalysts(DOC) Diesel Particulate Filters (DPF)and a Selective Catalysts Reduction(SCRs) to reduce to pollution from existing diesel engines employing filtration catalytic conversion and chemical reduction. 

Diesel Oxidation Catalysts

Through oxidation a Diesel Oxidation Catalyst (DOC) transforms dangerous diesel exhaust pollutants including carbon monoxide, unburned hydrocarbons and the organic fraction of particulate matter (PM) into less dangerous chemicals like carbon dioxide and water. Additionally it transforms nitric oxide into nitrogen dioxide, supporting the operation of downstream components such as Selective Catalytic Reduction (SCR) systems and Diesel Particulate Filters (DPF).

Diesel Particulate Filters

The act of burning off collected soot from the filter to keep it from clogging and preserve engine performance and emissions regulations is known as diesel particulate filter (DPF) regeneration. This is accomplished by increasing the exhaust temperature to more than 600°C and using passive (automatic), active (computer-controlled), or forceful (manual) techniques to turn soot into ash. Ignoring regeneration results in a blocked filter, poor performance, and expensive replacement.

Selective Catalysts Reduction 

Selective catalysts Reduction in an advanced active emission control technology system that reduces tailpipe emission of Nitrogen Oxides(NOx) down to near zero-levels in newer generation diesel- powered vehicles and equipment. The SCR system involves several components packaged together with other parts of the emission control system. 

Key Features and Benefits Of RECD

RECD (Retrofit Emission Control Device ) advanced technology for reducing harmful emission and diesel generators. In addition to these, another emission control system called Selective Catalyst Reduction (SCR) is used in vehicles to control Nitrogen Oxides (NOx) emissions by heavy use of ammonia (NH3). A retrofitted emission control equipment for a diesel generator set is the most efficient way to remove PM concentration from the exhaust. Our engineers at Aceget Instruments have designed and developed Retrofit emission control devices(RECD) for DG sets, in compliance with CPCB 2 norms that can achieve a maximum emission control rate of 95%. 

Easy to install.

No mechanical modification is required from the DG set.
Digital Pressure indication for Differential Pressure.

Temperature indication of exhaust gas.
Material construction with SS304 steel.

Online monitoring of Inlet and outlet temperatures
No moving parts
Less than 10 minutes of regeneration time
Very low maintenance.

Key Benefits of installing RECD Kits in industrial DG Set 

Installing Retrofit Emission Control Device (RECD) kits on Industrial Diesel Generators (DG) sets Reduces particulate matter (PM) by up to 99% and NOx by 95% ensuring Compliance with strict environment regulations. Key benefits include avoiding fines and shutdowns enhancing fuel efficiency improving air quality increasing engine lifespan, and boosting corporate social responsibility rating. 

Immediate CPCB Compliance

RECD kits assist industries in conforming to CPCB Phase II emission standards. As enforcement becomes stricter, accredited RECD installations guarantee that DG sets stay compliant and prepared for audits.

Decrease in Emissions

Contemporary RECD systems have shown a decrease in particulate matter of up to 99.21% during ICAT testing, directly enhancing air quality inside and near industrial sites.

Threats and Fines

By adhering to acceptable emission standards, industries substantially reduce the likelihood of fines, warnings, and mandatory shutdowns imposed by environmental regulatory agencies.

Sustains Generator Performance

RECD systems are designed to maintain DG performance, guaranteeing no reduction in power output or fuel efficiency while keeping exhaust back pressure stable.

Guarantees Operational Continuity

In areas with rigorous enforcement, non-compliant DG sets are often limited during times of high pollution. The installation of RECD allows for continuous operations amid these regulatory interventions.

Enhances ESG Outcomes

Environmental, Social, and Governance (ESG) criteria are playing a growing role in shaping the decisions of investors and stakeholders. RECD implementation showcases quantifiable dedication to cutting emissions and promoting sustainable practices.

Enhances Brand Image

Embracing certified emission control solutions enhances a company’s reputation as eco-friendly and compliant with regulations beneficial in B2B, export, and institutional sectors.

Conclusion

Retrofit Emission Control Device (RECD) for Diesel Generators (DG) set, is the best for both the environment and human body. An RECD isn’t just another box—it’s the high-tech purifier for your generator’s exhaust.Choosing an RECD is now a matter of when and which type understanding how they work is the first step to making a smart compliant choice for your business.