You can utilize your Orbi router as access point to increase the coverage of your home Wi-Fi without having to replace your current router. This allows the Orbi to provide enhanced Wi-Fi coverage while your primary router manages the network.
Attach the cables: First, use an Ethernet connection to link your Orbi router to your current router. Connect one end to the main router's LAN port and the other to the Orbi router's Internet/WAN port.
Turn on Orbi: When your Orbi router is ready, turn it on and watch for the LED lights to come on. During setup, keep the Orbi near the primary router.
Launch Orbilogin.Com: Join the Orbi Wi-Fi network with your computer or phone. Launch a web browser and type Orbilogin.com in the address bar. This will direct you to the Orbi setup page.
Log in: Enter your password and username for Orbi admin. Check the setup instructions that came with your Orbi device if you haven't modified the login credentials.
Locate AP Mode: Open the Advanced settings after logging in. Choose Router/AP Mode or a comparable option after searching for Advanced Setup.
Select the Access Point: Instead of choosing Router Mode, choose AP Mode. This enables the management of IP addresses and network configurations by your current router.
Click Apply or Save to put the changes into effect. While the new settings are being implemented, your Orbi can restart.
Verify the connection: Check to see if you can access the internet by connecting your devices to the Orbi Wi-Fi after the restart. For greater coverage, you can also relocate the Orbi.
An easy approach to expand Wi-Fi while maintaining control over your current router is to use your Orbi router as an access point. Check the Ethernet cable and confirm that the Orbi is in AP Mode if the connection isn't working. Visit our website to know more.
